What flatbed freight does CBS haul?
Steel coils and sheet, structural steel, lumber and building supply, heavy equipment and over-dimensional loads.
Steel, lumber, heavy equipment and oversize loads: what we haul and what the trailer needs.
Steel coils and sheet, structural steel, lumber and building supply, heavy equipment and over-dimensional loads.
Yes. Hot-rolled, cold-rolled and galvanized coils and sheet. We use carriers with coil racks who have loaded coils before.
Yes. Machinery, fabrications and over-dimensional loads. We coordinate permits, pilot cars and route surveys so the load moves legally and on time.
Yes. I-beams, H-beams and angle iron, with multi-stop jobsite delivery and crane coordination.
Yes. Dimensional lumber, engineered wood and roofing, tarped for weather. We run lanes into Home Depot and Lowe's distribution centers.
Use the equipment selector on the flatbed page. Enter the height, width, length and weight. It shows the equipment the load calls for and whether it needs permits.
A flatbed has one flat deck about five feet off the ground. A step deck has a lower main deck, so it carries taller freight under the same height limit.
A conestoga is a flatbed with a rolling tarp system. It loads from the side or the top like a flatbed and covers the freight like a van.
In most states a load needs a permit when it is wider than 8 feet 6 inches, taller than 13 feet 6 inches on the trailer, or heavier than 80,000 pounds gross. The rules change by state, so the route decides.
The pickup, the product and the weight. We handle the carrier, the securement plan and the tracking.
(360) 609-1177 is answered around the clock.